Powersoft – T-304A T-series TOURING AMP 4x750W @ 4 Ohm,DSP

Beschrijving

Serieus en betrouwbaar versterkerversterker Apparaat wat kleine signalen versterkt tot hoog speakernivo  materiaal, verkrijgbaar met en zonder proccesor en dante.

Echte probleemloze werkpaarden die jarenlang hun werk doen.

• 3000W/4-channel High-performance Amplifier with DSPOverview- The T Series is a very flexible and cost-effective amplifier platform with loudspeaker processor.
  – All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops.
  – MyPowersoft services are available for this productFeatures
  
  • The loudspeaker processing sets a new benchmark for cost-effective amplification for small and medium-sized systems and stage monitors. The T Series can be controlled and configured in different ways.
  • Full control with a PC running Armonía.
  • Control from the front panel display for features like preset recall (also per output), gain, delay, mute. This makes it very easy to use for small systems in a rental company. The display also shows the available headroom with easy to read numbers in dB as well as other status monitoring parameters.
  • Web app. Use any device with a browser (e.g. a tablet) and access the amplifier via an external WiFi access point for easy control.
  • Group controllable advanced EQ with raised cosine filters
  • Large preset library
  • Preset compatibility with X Series
  • Very long FIR filters (42.6 ms)
  • Control and monitoring through ArmoníaPlus

  Specifications

  General
  Output power per channel
  Output power per channel	750W @ 2 Ω	750 W @ 4 Ω	750 W @ 8 Ω
  Bridge mode		1500 W @ 4 Ω	1500 W @ 8 Ω
  Max output voltage / current
  Max unclipped output voltage @8 Ω			145 Vpeak
  Current			50 Apeak
  AC main power
  Power supply	Universal, regulated switch mode with PFC (Power Factor Correction)
  Nominal power requirement			100-240 V ±10%, 50-60 Hz
  Operating voltage			90 V – 264 V
  Power consumption/ Current draw
  1/8 of max output power @ 4 Ω		120 V: 537 W – 4.7 A	230 V: 525 W – 2.7 A
  THERMAL
  Thermal dissipation
  1/8 of max output power @ 4 Ω		120 V: 537 BTU/h -135.3 kcal/h	230 V: 512 BTU/h -129.0 kcal/h