The ZONE 622 is a particularly compact 1U zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The device has all the essential functions, an input for an external emergency announcement system with its own volume control, and a connection to the remote-controlled switching mute. The ZONE 622 is suitable as a sound system for separate zones in restaurants, clubs, hotels, fitness centres, and for presentations.
The two balanced microphone channels with stereo jack inputs are equipped with controls for Gain, Talkover volume, Talkover attenuation, 12V phantom power and a shared 2-band EQ. The line channels 1 and 2 can also be used to connect unbalanced microphones, and channel 6 is specially designed for balanced FOH signals. The stereo input channels of the ZONE 622 have a Cue button and volume control signal display, and the channels 1-5 have an additional gain trimmer. Furthermore, the zone mixer has a 3.5 mm mini jack input and a USB port , that is used as a Stereo Input and Output (Recording Out). So you can use the ZONE 622 as an external audio interface.
The stereo and mono output sections have their own meters, 2-band EQ, trimmer for adjusting the maximum output level, as well as electronically balanced jack plugs and terminal block connectors. In addition, the stereo section has unbalanced RCA jacks. An adjustable headphone jack for previewing and a recording output complete the equipment for the ZONE 622.
Specifications
General
Product type
Mixers
Type
Installations
Number of Zones
2 (Master, Zone)
Type
stereo
Installation Height
1 U
Total Input Channels
8 (2x Mic, 2x Mic/Line, 3x Line, 1x FOH)
Frequency response
20 – 40000 Hz
Microphone channels
2 (with phantom power 12 V)
Microphone Channel Connections
6.3 mm stereo jack (balanced)
Microphone channel controls
1 x EQ Hi, 1 x EQ Low, 1 x Talk Over Damp, 1 x Talk Over Level, Gain, On / Off
Microphone Channels Display Elements
On-LED
Microphone Channels Input Impedance
4 kOhm
Microphone Channels Input Sensitivity
6.1 mV
Microphone Channels THD
0.08%
Line / Microphone Channels
2
Line / microphone input connectors
2 x RCA, 3.5 mm stereo jack (input 1), 6.3 mm stereo jack (balanced)
Line / microphone channel controls
Cue, level, mic/lline, Trim
Line / Microphone Display Elements
Cue-LED, Signa-LED
Line Channels
3
Line input connectors
Input 3-4: 2 x RCA, Input 5: 2 x RCA + USB
Line Channel Controls
Cue, level, Trim
Line Channel Display Elements
Cue-LED, Signa-LED
Line Channel Input Impedance
4 kOhm
Line Channels Input Sensitivity
1.5 V
Line Channels THD
0.03%
input sensitivity AUX/Line
3 V
FOH Channels
1
FOH Input Connections
6.3 mm stereo jack (2 x balanced)
FOH Input Controls
Cue, level
FOH Input Display Elements
Cue-LED, Signa-LED
Line outputs
3 (Master – Stereo, Zone – Mono, Rec – Stereo)
Output Connectors Master
6.3 mm stereo jack (2 x balanced), RCA (x2), Terminal block
The same passion that takes hold of a musician on stage is what the engineers and designers at LD Systems® place into our products. These are not only sound technology specialists, but also sound technology enthusiasts, who passionately work out every detail until the sound and design meet the highest of standards.
Beoordelingen
Er zijn nog geen beoordelingen.
Wees de eerste om “LD Systems ZONE 622 19″ 2-Zone Mixer 1U” te beoordelen Reactie annuleren
Je moet ingelogd zijn om een beoordeling te plaatsen.
Beoordelingen
Er zijn nog geen beoordelingen.