Beschrijving
Platter dan platter…. en toch een uitstekende weergave en low feedback.
Uniek design weer van DB tech.
Ding kost best een pak pegels, (vraag offerte ) maar wat een onwijs doordringende vocals geeft dit monitor(tje) , ongekend !
(hint voor perfecte montoring: acoustic guitar, keyboards-Piano, blazers(!) )
This 2-way system is equipped with 4×4” neodymium HF speakers and 1×10” woofer, placed in an exclusive anti-feedback acoustic configuration. The cabinet is driven by a 400 W RMS Digipro G3 amplifier and full remote control is enabled via RD-Net and Aurora Net software.
Digital Sound Processing allow a variable acoustic focus via on-board presets or via software. As a matter of facts, user can easily adapt the wedge performance to the application in use and to the speakers’ needs, choosing among 4 different options: default, close, wide, far.
VIO W10’s wooden cabinet comes with a black polyurea finish and an exclusive front-rear-grille design which contributes to a peculiar yet discreet look, with a special attention to details. In facts, an integrated handle is hidden on left side to ease transport and a special groove carved on bottom side facilitates the passage of cables under the cabinet, allowing a clean and tidy look on stage.
- Active 2-way wedge monitor
- Innovative ultra-slim design
- Height 165 mm only
- 400W RMS Class-D amplifier
- Anti-feedback acoustic configuration
- Variable acoustic focus
- Remote control via RDNet
- Exclusive front-rear grille design
Technical Data
Speaker Type2-Way Active Wedge Monitor
Acoustical data
Usable Bandwith [- 10 dB]58 – 15,000 Hz
Frequency Response [- 6 dB]68 – 14,000 Hz
Max SPL126 dB
HF4x 4″ – 1″ v.c. Neodymium
LF1x 10″ – 2.5″ v.c.
Horizontal DirectivityDependent on Focus Preset
Vertical DirectivityDependent on Focus Preset
Amplifier
Amplifier400 W RMS Class D Digipro® G3
CoolingConvection
Power SupplyAuto-range SMPS
Processor
ControllerDSP 28/56 bit
Converter AD/DA24 bit/48 kHz
LimiterPeak, RMS, Thermal
Processing (filters)Linear Phase FIR Filters
Input
Signal Input1x XLR female, 1x RJ45 Link (RDNet) , 1 x USB (Data Service)
Signal Output1xXLR male, 1x RJ45 Link (RDNet)
Power Socket1x PowerCON TRUE1 In
1xPowerCON TRUE1 Out
Controls1x Rotary Encoder (8 presets)
1 x Input Sensitivity Encoder
1xMic /line switch
1x On LED
1x Status -LED
1x Signal LED
1x Limiter LED
Mechanics
HousingWooden cabinet, Polyurea painting
Handles1 on left side
Width450 mm (17.71 in)
Height165 mm (6.49 in)
Depth480 mm (18.89 in)
Weight13.7 kg (30.20 lbs)
Beoordelingen
Er zijn nog geen beoordelingen.