Serieus en betrouwbaar versterkerversterker
Apparaat wat kleine signalen versterkt tot hoog speakernivo
materiaal, verkrijgbaar met en zonder proccesor en dante.
Echte probleemlose werkpaarden die jarenlang hun werk doen.
Output power per Channel
800 W @ 2 Ω
600 W @ 4 Ω
600 W @ 8 Ω
Bridge mode
1600 W @ 4 Ω
1200 W @ 8 Ω
2400W/4-channel Flexible Amplifier
Overview
Quattrocanali 2404 offers the traditionally amazing sound quality and reliability of all Powersoft products.The patented SRM (Smart Rails Management) technology allows to maximize the efficiency of the system and drastically reduce power consumption in any load and usage condition. Quattrocanali features the lowest thermal dissipation in the industry, reducing the need for external cooling devices.Quattrocanali is designed to operate with Lo-Z (from 2 Ω) and 70V/100V distributed lines or any mix of the two.DSP+D versions of the Quattrocanali grant in-depth control and monitoring via Armonìa, tailoring the sound and managing the system can be done by a remote, decentralized location.This Amplifier Platform can also be trusted in mission-critical applications, such as fire alarm systems, thanks to the cleverly engineered power supply that allows reliable operation even when connected to a UPS.MyPowersoft services are available for this product.
Features
Power supply
Patented output filter with ripple cancellation network
Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
Protections
Fully protected circuit design with:
Ac protection: shut down power supply when AC mains voltage is outside operating range
Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
DC protection: protects against infrasonic signal at the outputs
VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
Long term limiter: protects the loudspeaker against steady long term RMS (non audio) signals, by reducing maximum output
Thermal protection: output stages operating temperature up to 80 °C (176 °F)
Temperature controlled continuous variable speed fan, front to back airflow
Temperature forecast with LCD traced historical behavior
General
Fixed frequency switch-mode output stage for high grade sound accuracy
Compact size – all models only 1 RU for reduced rack cost and space
Light weight – for easier racking and shipping: 7 kg (15.4 lbs)
Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
Remotely switchable double input (main and aux) per channel
Settings
Built-in defeatable clip limiters for each channel
Digital gain-attenuator control
Defeatable gate selection for each channel
User selectable gain/sensitivity
User selectable maximum output power for each channel
User selectable maximum mains current draw
Lockable set-up by user selectable access key code
Built in remote control via the RS-485 interface provides full diagnostic, operational setting and system monitoring
Serieus en betrouwbaar versterkerversterker
Apparaat wat kleine signalen versterkt tot hoog speakernivo
materiaal, verkrijgbaar met en zonder proccesor en dante.
Echte probleemlose werkpaarden die jarenlang hun werk doen.
Output power per Channel
1500 W @ 2 Ω
1200 W @ 4 Ω
1200 W @ 8 Ω
Bridge mode
3000 W @ 4 Ω
2400 W @ 8 Ω
4800W/4-channel Flexible Amplifier with DSP
Overview
Quattrocanali 4804 offers the traditionally amazing sound quality and reliability of all Powersoft products.The patented SRM (Smart Rails Management) technology allows to maximize the efficiency of the system and drastically reduce power consumption in any load and usage condition. Quattrocanali features the lowest thermal dissipation in the industry, reducing the need for external cooling devices.Quattrocanali is designed to operate with Lo-Z (from 2 Ω) and 70V/100V distributed lines or any mix of the two.DSP versions of the Quattrocanali grant in-depth control and monitoring via Armonìa, tailoring the sound and managing the system can be done by a remote, decentralized location.This Amplifier Platform can also be trusted in mission-critical applications, such as fire alarm systems, thanks to the cleverly engineered power supply that allows reliable operation even when connected to a UPS.MyPowersoft services are available for this product.
Features Power supply
Patented output filter with ripple cancellation network
Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
Protections
Fully protected circuit design with:
Ac protection: shut down power supply when AC mains voltage is outside operating range
Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
DC protection: protects against infrasonic signal at the outputs
VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
Long term limiter: protects the loudspeaker against steady long term RMS (non audio) signals, by reducing maximum output
Thermal protection: output stages operating temperature up to 80 °C (176 °F)
Temperature controlled continuous variable speed fan, front to back airflow
Temperature forecast with LCD traced historical behavior
General
Fixed frequency switch-mode output stage for high grade sound accuracy
Compact size – all models only 1 RU for reduced rack cost and space
Light weight – for easier racking and shipping: 7 kg (15.4 lbs)
Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
Remotely switchable double input (main and aux) per channel
Settings
Built-in defeatable clip limiters for each channel
Digital gain-attenuator control
Defeatable gate selection for each channel
User selectable gain/sensitivity
User selectable maximum output power for each channel
User selectable maximum mains current draw
Lockable set-up by user selectable access key code
Built in remote control via the RS-485 interface provides full diagnostic, operational setting and system monitoring
Serieus en betrouwbaar versterkerversterker
Apparaat wat kleine signalen versterkt tot hoog speakernivo
materiaal, verkrijgbaar met en zonder proccesor en dante.
Echte probleemlose werkpaarden die jarenlang hun werk doen.
Output power per Channel
1800 W @ 2 Ω
2400 W @ 4 Ω
1600 W @ 8 Ω
Bridge mode
3600 W @ 4 Ω
4800 W @ 8 Ω
Overview
Quattrocanali 8804 DSP offers the traditionally amazing sound quality and reliability of all Powersoft products.The patented SRM (Smart Rails Management) technology allows for the maximization of the system’s efficiency and drastically reduces power consumption in any load and usage condition. Quattrocanali features the lowest thermal dissipation in the industry, reducing the need for external cooling devices.Quattrocanali is designed to operate with Lo-Z (from 2 Ω) and 70V/100V distributed lines or any mix of the two. DSP versions of the Quattrocanali grant in-depth control and monitoring via ArmoníaPlus, tailoring the sound and managing the system can be done in a remote, decentralized location.This Amplifier Platform can also be trusted in mission-critical applications, such as fire alarm systems, thanks to the cleverly engineered power supply that allows reliable operation even when connected to a UPS.MyPowersoft services are available for this product. Features
Power supply
Patented output filter with ripple cancellation network
Low Inrush Limiting reduces AC inrush current, removing the need for expensive power sequencers
Detachable AC mains cable with IEC C19/22.2 (16A for EU, 20 A for USA) socket
Protections
Fully protected circuit design with:
Ac protection: shut down power supply when AC mains voltage is outside operating range
Clip limiter: prevents severely clipped waveforms from reaching loudspeakers, while still maintaining full peak power output
DC protection: protects against infrasonic signal at the outputs
VHF protections: protects the loudspeakers against non audible, strong, non musical high frequency signals
Short circuit protection: protects the amplifier from short circuit or other stressful events for the output circuits with automatic protection reset
Long term limiter: protects the loudspeaker against steady long term RMS (non audio) signals, by reducing maximum output
Thermal protection: output stages operating temperature up to 80 °C (176 °F)
Temperature controlled continuous variable speed fan, front to back airflow
Temperature forecast with LCD traced historical behavior
General
Fixed frequency switch-mode output stage for high grade sound accuracy
Compact size – all models only 1 RU for reduced rack cost and space
Light weight – for easier racking and shipping: 7 kg (15.4 lbs)
Standard Phoenix connectors: analog audio outputs, aux supply, alarms and GPIO
Remotely switchable double input (main and aux) per channel
Settings
Built-in defeatable clip limiters for each channel
Digital gain-attenuator control
Defeatable gate selection for each channel
User selectable gain/sensitivity
User selectable maximum output power for each channel
User selectable maximum mains current draw
Lockable set-up by user selectable access key code
Built in remote control via the RS-485 interface provides full diagnostic, operational setting and system monitoring
Laat ons een offerte maken voor een scherm(en) op door uw gewenste afmetingen , opgebouwd met ADJ panelen.
We bieden lage aankoopkosten voor uw instap in videowall systemen
Met dit prijssegment komt vervanging van uw beamer & scherm letterlijk in beeld
Het verschil van impact van een projectie t.o.v. een videowall is enorm.
• Pixel Density : 84 x 84 pixels, 28224 per square meter
• Average LED lifetime/MTBF : 50,000 hrs./5,000 hrs.
• Pixel Pitch: 5.95mm
• Gaps < 0.5mm
• Brightness: 1000 NITS
• View Angle: Horizontal 160°/Vertical 140°
• Gray Scale / Display Color: ≥14-bit / 256
• Brightness Adjustment: 0~100% 100 Levels
• Contrast Ratio: 5000:1
• Processing: 14-bit
• Built-In Novastar Receiving Card
• LED Refresh Rate: 3840Hz
• Control Distance: Ethernet Cable <100m or Fiber Optic >120m
• Optional Novastar Sending Cards and Accessories available
• Magnetic Aluminium Frame with built-in corner protectors
• Module Quantity: 4, magnetic module design
• Module Size : 250 x 250mm, Front & Rear serviceable
• IP Rating: IP20
• Multivoltage 100-240V 50/60Hz
• Max Power Consumption: 170W/panel
• Average Power Consumption: 68W/panel
• Operational temperature: -20 to +40 degrees
• Operational humidity: 10% — 90% (no condensation)
• Locking RJ45 In/Out connections
• Locking Power In/Out connections
• Dimensions (LxWxH): 500 x 69.6 x 500mm
• Weight: 7,7 kg.
ADJ is pleased to introduce the Vision Series, the company’s next generation of LED video panels. Building on the reputation the brand has built for reliability, affordability and simplicity through its previous LED video products, the new range offers a versatile modular system packed with advanced level features. These include front serviceability, magnet-aided rigging, and fold-out corner protectors.
The new ‘VS’ Vision Series of LED video panels offers a versatile modular solution that has been developed to make life easier for video professionals installing LED walls on either a temporary or permanent basis. Each panel in the range features four individual modules, which are front serviceable, making it ideal for temporary hanging as well as permanent installation. Across the range, the modules are all mounted to the same frame, allowing panels of different resolutions to be used together and meaning that the same rigging bar and other accessories can be used for all VS models.
Featuring the highest quality LED binning as well as bright, clear output, the VS Series features three panel models. The VS5 offers a 5.95mm pixel pitch (84 x 84 pixel density), the VS3 has a 3.91mm pixel pitch (128 x 128 pixel density) and the VS2 offers the highest resolution in the range with a 2.97mm pixel pitch (168 x 168 pixel density). All three panels utilize 3-in-1 RGB SMD2121 LEDs with a brightness of 1000 NITS and a very high refresh rate of 3840Hz. They offer a wide viewing angle of 160° (horizontal) / 140° (vertical) and a high contrast ratio of 5000:1, allowing for the delivery of exceptionally vibrant video reproduction.
Every panel in the range is equipped with a high quality Novastar A5s data receiving card and features DataLock securely-locking ethernet input and output sockets that allow the signal from a compatible video processor (for example the Novastar MCRTL-300, VX4S or Nova Pro HD) to be linked from panel to panel. Each unit is also equipped with locking power input and output sockets, which can be used to link the power supply from one panel to another.
All of the panels feature in-built articulated protectors which fold out from the back of the unit to provide protection to the corners – the parts of the panels most prone to damage – during transit. In addition, each panel also features a convenient recessed carry handle built-in to its top edge. This makes the compact (19.68” x 19.68” x 2.75” / 500mm x 500mm x 69.6mm) and lightweight (17 lbs. / 7.7kg.) panels extremely easy to carry and rig.
Rigging of the panels is made even easier by the Vision Series’ innovative magnetic locating system. This pulls together the top of one panel to the bottom of another, allowing a technician to hold the new panel temporarily in place with just one hand while using their other hand to engage the pin-locking mechanism. This means that a single crew member can quickly and easily a erect a full wall of panels.
The VS Series is completed by a range of accessories that can all be used interchangeably with any of the panels in the range. The VSRB1 is an intelligently-designed rigging bar that can be used to vertically hang or ground stack up to 20 VS panels. The VSRQR is a convenient ‘quick rig’ attachment that fits to the rear of any Vision Series panel so that it can be fastened directly to a 2” pipe or truss. The VSSCSB is a support base that allows up to three VS panels to be mounted in a freestanding column, ideal for temporary digital signage applications. The VSMRT is a module removal tool that magnetically attaches to the front of Vision Series panels to aid technicians in removing modules from the front side when servicing.
A dedicated flight case, the VSFC8, has also been created specifically for protecting and transporting up to eight Vision Series LED panels. The robust wheeled road trunk features eight padded slots for the panels, a hinged lid that locks in place using two butterfly catches, a rubber bumper strip that runs around all four sides of the case, and two recessed bar handles on either end. It also features a useful clear plastic window that runs down one side, allowing users to easily identify how many panels are stored in a case without opening the lid. This also allows crew members to check which way the panels are facing if the case needs to be flipped on its end, so that they can ensure the LEDs are facing upwards.
“Since ADJ entered the LED video panel market with the AV Series over five years ago, we’ve enjoyed phenomenal success,” explains ADJ USA’s National Sales Manager, Alfred Gonzales. “ADJ video panels are now used worldwide, installed permanently in churches, nightclubs and entertainment centers, and utilized by production companies working on all kinds of tours and one-off events. However, at ADJ we never dwell on our past successes, but always strive to do even better. For the new Vision Series, we’ve combined everything that made the AV Series so popular – value, reliability and ease of use – while also addressing the feedback we’ve received from our valued customers. Front serviceability is something that integrators often ask for, which we are pleased to offer throughout this new range, while the innovative magnetic rigging system offered by the Vision Series will make life a whole lot easier for our event production and touring customers.”
Watch the Vision Series Video Panels Features Video:
Let op: wij maken scherpere prijs bij vier, zes , acht, tien of meer stuks.
Prijs is voor set van 2 stuks.
High performance version ,
professional Beam/Spot/Wash moving head,
260 watt Led source 7500K,
zoom 2.5°-36°,
antireflection 136mm front lens,
11 colors ,
16 static gobos,
6 rotating indexable gobos,
frost filter,
motorized focus,
3 facet prism ,
powercon in/out.
Light source / Optics
Latest technology optics and led source that provide 50% more brightness from previous version.
1x 260 Watts white LED – 20.000 Lux – 8500k
7500 Kelvin color temperature.
Life span approximately 50,000.
Motorized zoom with 2,5 to 36 degrees.
Uniform light beam.
Optical system with antiriflection lenses.
Effects
11 dichroic colors plus white.
1 static gobo wheel with 16 gobos plus open.
1 rotating gobo wheel with 6 gobos plus open.
Frost filter.
Motorized zoom and focus from 2 to 20 meters.
3 Face rotating prism.
Control
Master / Slave, Auto, Sound and DMX control modes.
16, 14 or 18 DMX control channels.
630°, 540° & 360° Pan and 270°, 180° & 90° Tilt range modes.
Auto reposition on both Pan/Tilt movements.
Temperature controlled fan speed.
Installation / Dimension details
Input Voltage: AC90-260V 50/60Hz
Power Consumption: 340W
PowerCon In/Out
Fan Cooling System
Noise: 46 dB @ 1 meter.
Protection Rating : IP 20
Dimensions:356*224*492(mm)
Packing Dimensions:510*470*650 (mm)
Net Weight:13.3kgs
Gross Weight:16kgs
Photometric Data
Measuring Distance: 5 meters
Minimum Zoom
Color Temperature (K): 12693
Illuminance (lx): 29945
CRI (Ra): 77
TLCI (Qa): 46.6
Flicker Frequency (Hz): 249
Flicker(%):65
Maximum zoom
Color Temperature (K): 12314
Illuminance (lx): 2320
CRI (Ra): 78
TLCI (Qa): 47.8
Flicker Frequency (Hz): 131
Flicker(%): 10
Copyright G&L Techniek.
Alle rechten voorbehouden.