18 -sound ND 1480-A High Frequency Neodymium Driver (8 of 16 ohm)

Categorieën: ,

Beschrijving

Key features

8/16 1,4” exit HF Neo Driver – 3” vc – 160W program power – 111dB@1W/1mt – Aluminum PEN – EWAL – copper ring

    • 110 dB 1W / 1m average sensitivity
    • 1,4 inch exit throat
    • 3 inch edgewound aluminum voice coil
    • 200 W program power handling
    • Pure Titanium diaphragm assembly
    • Excellent thermal exchange
    • Neodymium ring magnetic structure

Description

The ND1480 1.4 inch exit neodymium high frequency compression driver
has been designed for high level sound systems application.
The
titanium diaphragm is produced in house and has been developed to
assure unmatched transient response. The diaphragm assembly is made by
joining the former directly to the titanium dome on its upper bend
edge. In comparison with a usual straight former joint, the driver?s
design assures extended frequency energy transfer for improved response
linearity and unparallel reliability. This feature facilitates proper
motion control of the dome in real working conditions. A proprietary
treated Nomex former is used as Nomex shows a 30% higher value of
tensile elongation at a working operative temperature (200?C) when
compared to Kapton. Moreover, this proprietary former material is also
suitable for use in higher moisture content environments.
The
ND1480 powerful neodymium magnet assembly has been designed to obtain
22KGauss in the gap for major benefits in transient response. The motor
structure, throughout the precisely coherent phase plug with 3
circumferential slots and copper ring on the pole piece, reduces
inductance effect and distortion. Four top plate air ducts have been
designed to act as a loading chamber for the diaphragm, implementing
mid band distortion and response figures.
The custom designed
O-ring creates a tight seal between the plate and the cover assuring
air chamber loading. Excellent heat dissipation and thermal exchange
are guaranteed by the direct contact between the magnetic structure and
the aluminum cover which leads to a lower power compression value.
The
ability to perform properly under inclement weather conditions is a key
point of the Eighteen Sound philosophy. Hence, a special treatment is
applied to the magnet and the top and back plates of the magnetic
structure in order to make the driver more resistant to the corrosive
effects of salts and oxidization. This treatment is more effective than
any other treatment in use today.

GENERAL SPECIFICATIONS
Throat Diameter 35,5 mm (1,4 in)
Rated Impedance 8 ohm
DC Resistance 6,2 ohm
Minimum Impedance 8 ohm at 3500 Hz
Le (at 1kHz) 124 ?H
AES power (1) 100 W above 1,2 kHz
Program power (2) 200 W above 1,2 kHz
Sensitivity (1W@1m) (3) 110 dB
Frequency Range 500 Hz ? 20 kHz
Recomm. Xover Frequency above 800 Hz (12 dB/octave)
Diaphragm Material Titanium
Voice Coil Diameter 75 mm (3 in)
Voice Coil Winding Material Edge-wound aluminum
Magnet Material Neodymium
Flux Density 2,2 T
BL Factor 15,5 N/A
Polarity Positive voltage on red terminal gives positive pressure in the throat

 

MOUNTING INFORMATIONS
Overall diameter 131 mm (5,1 in)
Mounting holes diameter 4 M6 holes 90? at ?102 mm (4 in)
Bolt circle diameter 102mm (4 in)
Total depth 62 mm (2,5 in)
Net weight 3,1 Kg (6,98 lb)
Shipping weight 3,3 Kg (7,25 lb)
CardBoard Packaging dimensions 132x132x68 mm (5,2×5,2×2,7 in)

Extra informatie

Gewicht 4.00 kg

Merk

18-Sound

18 Sound:  voor zowel de zelfbouwer of als vervanger van merk speakers. Mail ons voor een eerlijke prijsopgaaf, we kunnen onder alle duitse prijzen, maar kunnen die niet op internet vermelden ;-)   .

Beoordelingen

Er zijn nog geen beoordelingen.

Wees de eerste om “18 -sound ND 1480-A High Frequency Neodymium Driver (8 of 16 ohm)” te beoordelen