E-Vision Laser 15000 – our brightest E-Vision ever!
The E-Vision range of single-chip DLP projectors has taken another huge leap forward in brightness with the introduction of the 15,000 Lumen E-Vision 15000.
Like other recent additions to the E-Vision range, the E-Vision 15000 employs Colorboost + Red Laser Technology. Already renowned for being a robust, reliable workhorse, the latest generation of this compact, lamp-free projector utilises Colorboost+Red technology to create the most realistic and beautifully saturated colours ever seen from any high-brightness 1-Chip DLP Projector. With new intelligent processing, colour performance of the E-Vision Laser 15000 is ever closer to that of a 3-Chip DLP projector.
New to the E-Vision 15000 is Art-Net control that allows easy integration into existing lighting installations, making this E-Vision powerhouse projector ideal for everything from live events to visitor attractions.
The E-Vision 15000 WU has sealed optics and uses liquid cooling with radiators to remove energy to the outside environment. The optical system, from the laser light source up to the lens is completely sealed and can be considered IP60 rated. This ensures that light output and colour performance will not be degraded due to the ingress of dust. Another advantage of liquid cooling via radiators is that the projector is completely filterless. This greatly reduces maintenance requirements when compared to many competitive products where replacement or cleaning of filters is a regular necessity.
E-Vision Laser 15000 WU
15,000 ISO / 13,500 ANSI Lumens | Contrast Ratio: 10,000:1 (Dynamic Black) 1,000:1 native | Part Number: 120-995
Key Specifications:
Colour System:
Blue and Red Lasers with Phosphor wheel
Display Type:
1 x 0.67″ DarkChip™ DMD™
DMD Specification:
1920 x 1200 pixels native display.
Fast transit pixels for smooth greyscale and improved contrast.
Aspect Ratio:
16×10
Fill Factor
87%
Key Features:
Red Laser Assist
Uses blue and red laser diodes for increased colour fidelity and highly accurate colours
Video & Graphics Processing
HDMI 1.4b for Side by Side, Frame Packing, Frame Sequential & Top Bottom 3D formats.
Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources.
Triple Flash processing for 24Hz 3D input (Frame Packed and Dual Pipe 3D)
Dual Pipe Processing: Two sources in parallel for Left and Right eyes.
Synchronisation of active glasses.
3GSDI with loop-through.
24p and 1080p native display.
DICOM simulation mode.
Geometry Correction
Four Corners, Vertical & Horizontal Keystone, Pincushion & Barrel, Arc and Image Rotation.
Non Linear Warp.
Blanking control for custom input window sizing.
Digital zoom, pan and scan.
Scaling available for fixed aspect ratio screens and independent input aspect ratios.
Edge Blending
For independent edge and blend width adjustment.
Correction for non-active pixels at the edge of the display.
Electronic black level compensation.
Picture in Picture
Two sources can be displayed either one within the other (PIP), or side by side, with original aspect ratios maintained.
HDBaseT® Interface
Built in support for reception of uncompressed High Definition Video over standard CAT5e/6 LAN cable.
Allows the projector to be placed up to 100m from the source with low cost cabling.
Colour Processing
Powerful seven point colour correction for accurate colour matching.
Selectable default colour gamut
Projector Control
Intuitive user interface for network control
PC Projector Controller Application for:
Simultaneous control of user-defined groups of projectors
At-a-glance monitoring of projector status
Served web pages for browser monitoring and control access from PC’s and Smart phones
Projector Automation
Real-time clock provides daily on/off automation.
Projector Maintenance Features
Sealed optics.
Long life 20,000 hour illumination.
Source Compatibility
3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant.
HDMI including Deep Color™ processing.
Graphics standards up to 1920 x 1200 resolution at 60Hz via HDMI, DisplayPort or VGA.
Component Video (SD and HD) via RGBHV.
Inputs/Outputs
Video & Computer
Communication & Control
Type
Connector
Qty
Type
Connector
Qty
DVI-D 1.0
DisplayPort 1.1a
HDMI 1.4b
3G-SDI in
3G-SDI out
VGA / Analog RGB
VGA Monitor out
Component Video
HDBaseT (see LAN)
DVI
DisplayPort
HDMI
BNC
BNC
15-pin D-Sub
15-pin D-Sub
5 x BNC
LAN RJ45
1
1
2
1
1
1
1
1
1
3D Sync Out
3D Sync In
LAN
RS232
Wired Remote
12V Trigger
USB Power 5V/2ANOTE: The LAN port is shared with HDBase-T.
NOTE: USB Power only for WHDI interfaces.
BNC
BNC
RJ45
9-pin D-Sub
3.5mm Stereo Jack
3.5mm Stereo Jack
USB Type A
1
1
1
1
1
2
1
3D Formats Supported
Frame Packing
Dual Pipe
Frame Sequential
Side By Side (half)
Top and Bottom
* Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%,
Lens Mount
Motorised and programmable shift, zoom and focus.
Intelligent Lens Memory with 10 user-definable preset positions (except UST lens).
Operating: 0 to 35C (32 to 95F)
Operating: 35 to 40C (95 to 104F) w/ reduced light output
Storage: -20 to 60C (-4 to 140F)
Operating Humidity
10 to 90% relative, non-condensing
Weight
29.5 kg / 65 lbs
Dimensions
L: 59.83 cm x W: 50 cm x H: 21.85 cm
L: 23.55 in x W: 19.68 in x H: 8.60 in
Extra informatie
Gewicht
29 kg
Merk
Digital Projection
Als we dan mogen kiezen voor een beamer & ledwall fabrikant in ons programma, dan meteen ook voor een wereldwijd A-merk.
Digital Projection International manufactures & distributes an extensive line of ultra-high-performance 3-chip & single-chip DLP® projectors, along with Radiance LED – direct-view, fine-pitch LED displays.
Beoordelingen
Er zijn nog geen beoordelingen.
Wees de eerste om “E-Vision Laser 15000 WU 15,000 Lumens Colorboost + Red Laser Technology” te beoordelen Reactie annuleren
Je moet ingelogd zijn om een beoordeling te plaatsen.
Beoordelingen
Er zijn nog geen beoordelingen.