Beschrijving

The high resolution and powerfully bright M-Vision projectors are perfect display solutions for any small to large venues including mid-size theaters as well as mid to large venues with ambient light, such as classrooms, training facilities, corporate boardrooms, houses of worship, and auditoriums.

M-Vision 23000 WU
The Digital Projection M-Vision 23000 WU boasts an unprecedented 23,000 lumens output and 10,000:1 contrast ratio, to bring budget-sensitive applications a large-screen imaging solution and near 3-Chip performance at a 1-Chip price point.

The new lamp-free, laser-phosphor projector is charged with ColorBoost + Red Laser technology to provide the most realistic and saturated colours at previously unreachable luminance levels. Venues needing powerful, yet budget-conscious, large-format imagery without sacrificing colour accuracy, as well as those contending with ambient light, will directly benefit from the M-Vision 23000’s market leading light output, contrast ratio and colourimetry. Its DisplayPort accepts frame rates up to 60 Hz and HDMI 1.4b for Side by Side, Frame Packing & Top Bottom 3D formats. Motorised shift, zoom and focus across the whole lens range offer extra flexibility and ease of setup.

The optical system, from the laser light source up to the lens is completely sealed and can be considered IP60 rated. This ensures that light output and colour performance will not be degraded due to the ingress of dust. Additionally, this projector is completely filterless as the system is liquid cooled and uses a radiator heat exchanger, minimising maintenance as no replacement or cleaning of filters is necessary and allows unrestricted airflow.

The 0.96” DarkChip DMD, teamed with blue and red lasers and a four-segment colour wheel produce unrivalled image quality and brightness in the single chip projector market.

Key Specifications:

Colour System: Blue + Red Laser and 4-segment colour wheel Display Type: 1 x 0.96″ DarkChip™ DMD™ DMD Specification: 1920 x 1200 pixels native display. Fast transit pixels for smooth greyscale and improved contrast. Aspect Ratio: 16×10 Fill Factor 87% Key Features: Red Laser Assist Uses blue and red laser diodes for increased colour fidelity and highly accurate colours Video & Graphics Processing HDMI 1.4b for Side by Side, Frame Packing, Frame Sequential & TopBottom 3D Formats. Dual Flash Processing can be used to multiply the displayed frame rate for 3D sources. Dual Pipe Processing: Two sources in parallel for Left and Right eyes. Synchronisation of active glasses. 3G-SDI with loop-through. 24p and 1080p native display. Geometry Correction Cornerstone, Vertical & Horizontal Keystone, Pincushion & Barrel, and Image Rotation. Blanking control for custom input window sizing. Scaling for fixed aspect ratio screens. Edge Blending Correction for non-active pixels at the edge of the display. Picture in Picture Two sources can be displayed either one within the other (PIP) , or side by side, with the original aspect ratios maintained. HDBaseT® Interface Built in support for transmission of uncompressed High Definition Video over standard CAT5e/6 LAN cable. Allows the projector to be placed up to 100m from source with low cost cabling. Colour Processing Powerful seven-point colour correction for accurate colour matching. Projector Controller Software Intuitive user interface for network control. Simultaneous control of user-defined groups of projectors. At-a-glance monitoring of projector status. Projector Automation Real-time clock provides daily on/off automation. Installation Integrated stacking mount pins. Eye bolts included for easy rigging. Source Compatibility 3GSDI is SMPTE 292M, SMPTE 259M-C and SMPTE 424M compliant. HDMI including Deep Color™ processing. Graphics standards up to 1920 x 1200 resolution at 60Hz via HDMI or DisplayPort. Inputs/Outputs Video & Computer Communication & Control Type Connector Qty Type Connector Qty DisplayPort 1.1a HDMI 1.4b 3G-SDI in 3G-SDI out HDBaseT DisplayPort HDMI BNC BNC LAN RJ45 2 2 1 1 1 3D Sync Out 3D Sync In LAN RS232 Wired Remote 12V Trigger NOTE: The HDBaseT and LAN ports are not shared. BNC BNC RJ45 9-pin D-Sub 3.5mm Stereo Jack 3.5mm Stereo Jack 1 1 1 1 1 2 3D Formats Supported Frame Packing Dual Pipe Frame Sequential Side By Side (half) Top and Bottom HDTV Formats Supported 1080p (24Hz, 25Hz, 30Hz, 50Hz, 60Hz), 1080i (50Hz, 60Hz), 720p (50Hz, 60Hz) Computer Compatibility Up to 1920 x 1200 Bandwidth 165 MHz on analog RGB 165 Megapixels per second on HDMI Remote Control Addressable IR Remote Control, wireless and wired On-Board keypad Automation Control Crestron RoomView® Connected PJLink Class 1 LAN RS232 AMX (Device Discovery) Served web page Colour Temperature 3200K to 9300K Operation illumination Type Laser Light Source Typical illumination Life 20,000 hours Lenses Lens Part No. Lens Shift (Frame) Optimised Focus Range* 0.9 – 1.2 : 1 zoom 120-624 0.92m – 13.46m Vert: 0.45 (U) 0.45 (D) frame, Hor: 0.15 (L) 0.15 (R) frame 1.20 – 1.56 : 1 zoom 120-625 1m – 17.5m Vert: 0.5 (U) 0.5 (D) frame, Hor: 0.15 (L) 0.15 (R) frame 1.50 – 2.00 : 1 zoom 120-626 2m – 21.8m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame 2.00 – 4.00 : 1 zoom 120-627 2.5m – 41.8m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame 4.00 – 7.00 : 1 zoom 120-628 4m – 42m Vert: 0.5 (U) 0.3 (D) frame, Hor: 0.15 (L) 0.15 (R) frame * Lens focal ranges above are the optimised distances but are likely to focus further, please contact your RSM for more details. Lens ratio tolerances: E-Vision Series: +/-3%. HighLite Series: +/- 5%. M-Vision Series: +/- 2%. Titan Series: +/-2%, INSIGHT Series: +/-2%, Lens Mount Motorised shift, zoom and focus, with programmable shift Mechanical Mounting Front/Rear Table Front/Rear Ceiling Adjustable Front/Rear Feet Orientation Table Top or Inverted: Yes Pointing Up:        Yes Pointing Down:   Yes Roll (Portrait):      Yes Power Requirements 110V~130Vac/ 50~60Hz 180V~240Vac/ 50~60Hz single phase * Note that in 120V operation, the projector will be at 65% brightness Power Consumption Typical 1900W @ 240VAC in Normal mode Typical 1250W @ 110VAC in Normal mode Thermal Dissipation Typical 6482 BTU/Hour @ 220VAC in Normal mode Typical 4265 BTU/Hour @ 110VAC in Normal mode Fan Noise Normal mode: 50 dBA max, 48 dBA typical Eco mode: 48 dBA max, 46dBA typical Operating/Storage Temperature Operating: Operating: 0 to 35C (32 to 95F) Operating: >35 (95F) Projector automatically set to eco mode Storage: -20 to 60C (-4 to 140F) Operating Humidity 10% to 90% relative, non-condensing Weight 54 kg / 119 lbs Dimensions L: 74.8cm W: 53.0cm H: 24.8cm L: 29.5in W: 20.9in H: 9.8in